Graded-index fiber

A graded-index fiber, or gradient-index fiber, is an optical fiber whose core has a refractive index that decreases continuously with increasing radial distance from the optical axis of the fiber, as opposed to a step-index fiber, which has a uniform index of refraction in the core, and a lower index in the surrounding cladding.

Because parts of the core closer to the fiber axis have a higher refractive index than the parts near the cladding, light rays follow sinusoidal paths down the fiber. The most common refractive index profile for a graded-index fiber is very nearly parabolic. The parabolic profile results in continual refocusing of the rays in the core, and minimizes modal dispersion.

Multi-mode optical fiber can be built with either a graded-index or a step-index profile. The advantage of graded-index multi-mode fiber compared to step-index fiber is a considerable decrease in modal dispersion. This means that the trip time of photons traversing the fiber is more consistent, allowing shorter and more frequent pulses of light to be discerned by the receiver. Modal dispersion can be further decreased by selecting a smaller core size (less than 10 μm) and forming a single-mode step index fiber.^[1]

This type of fiber is normalized by the International Telecommunication Union ITU-T in recommendation G.651.1.^[2]

Pulse dispersion

Pulse dispersion in a graded-index optical fiber is given by^{[citation needed]}

$\mathrm {Pulse~dispersion} ={\frac {k\delta n\ n_{1}\ l}{c}}\,\!,$ where

${\textstyle \delta n\,\!}$ is the difference in refractive indices of core and cladding,

${\textstyle n_{1}\,\!}$ is the refractive index of the cladding,

${\textstyle l\,\!}$ is the length of the fiber taken for observing the pulse dispersion,

${\textstyle c\approx 3\times 10^{8}~\mathrm {m/s} \,\!}$ is the speed of light, and

${\textstyle k\,\!}$ is the constant of graded index profile.

References

^ A Reference Guide to Optical Fibers and Light Guides, archived from the original on July 22, 2015, retrieved April 22, 2015
^ Characteristics of a 50/125 μm multimode graded index optical fibre cable for the optical access network, retrieved November 23, 2012

This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on January 22, 2022. (in support of MIL-STD-188).

This optics-related article is a stub. You can help Wikipedia by expanding it.

[1] A Reference Guide to Optical Fibers and Light Guides, archived from the original on July 22, 2015, retrieved April 22, 2015

[2] Characteristics of a 50/125 μm multimode graded index optical fibre cable for the optical access network, retrieved November 23, 2012

[1]

[2]

Pulse dispersion

See also

References