Gondola (rail)

For other uses, see Gondola (disambiguation).

This article is about North American railroad practice. For information on European open wagons, see Open wagon.

A railroad gondola seen at Rochelle, Illinois

In North American railroad terminology, a gondola or gondola car is typically an open-topped railroad car used for transporting loose bulk materials; some are covered. Because of their low side walls, gondolas are also suitable for the carriage of such high-density cargos as steel plates or coils, or of bulky items such as prefabricated sections of rail track. Gondolas are distinct from hopper cars in that they do not have doors on their floor to empty cargo.

In some Australian states that follow British practice, gondola cars are called "open wagons".

History

The first gondola cars in North America were developed in the 1830s, and used primarily to carry coal. Early gondolas were little more than flatcars with wooden sides added, and were typically small – 30 feet (9.1 m) or less in length, and 15 short tons (13 long tons; 14 t) or less in weight. Those cars were not widely used at first, because they could only be unloaded by workers shoveling out the cargo by hand, a slow and labor-intensive process. A solution to the problem was developed around the 1860s with the drop-bottom gondola, with hatches installed in the floor which could be opened at the destination, and workers using shovels to direct cargo towards the hatches. Although it was an improvement over earlier gondolas, it still required manual unloading.

This covered gondola protects its cargo from exposure to moisture while in transit.

After the American Civil War, advances in technology, especially the development of steel, allowed new and larger gondola designs. New gondolas built with steel sides and frames, although wood was retained for flooring, since it was flexible and cheap to replace. The cars were often built to lengths between 40 and 50 feet (12 and 15 m), and gradually increased in capacity from around 30 short tons (27 long tons; 27 t) to as much as 70 short tons (63 long tons; 64 t) by the early to mid 20th century.

Gondolas began to be built for specialized purposes and, depending on their intended cargo, the side heights could range from just two feet (0.61 m) for bulk commodities like sand, to six feet (1.83 m) or more for loads such as pipes, ten feet (3.0 m), or more for light cargos such as woodchips. Covered gondolas were also developed for cargos that had to be protected from the elements, such as food and freshly made steel. Starting in the 1950s and 1960s, high-sided gondolas were used for coal, thanks to stronger car construction and the invention of rotary car dumpers, which allowed those gondolas to be emptied automatically.

Specialized car types

"Bathtub" gondolas

A bathtub gondola passing through Rochelle, Illinois, in 2005

In the second half of the 20th century, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them. The term "bathtub" refers to the shape of the car.

The "Double Rotary" coal gondola is required in this consist. The "Double Rotary" referring to this car that has rotary couplers on both ends instead of one end.

Coil car

Main article: Coil car

The coil car is a modified gondola designed specifically for carrying coils of metal.

Track ballast gondolas

A side-dump gondola on display at the US National Railroad Museum

Track ballast gondolas carry ballast. These gondolas are side tipping.

See also

• Corf
• Decauville wagon
• Minecart § Lorry or mine car
• Mineral wagon
• Mine railway
• Quarry tub
• Railgon Company
• Well car