Jump to content

Single program, multiple data

From Wikipedia, the free encyclopedia
"SPMD" redirects here. For the membrane technology, see Semipermeable membrane device.

In computing, single program, multiple data (SPMD) is a term that has been used to refer to computational models for exploiting parallelism where-by multiple processors cooperate in the execution of a program in order to obtain results faster.

The term SPMD was introduced in 1983 and was used to denote two different computational models:

  1. by Michel Auguin (University of Nice Sophia-Antipolis) and François Larbey (Thomson/Sintra),[1][2][3] as a “fork-and-join” and data-parallel approach where the parallel tasks (“single program”) are split-up and run simultaneously in lockstep on multiple SIMD processors with different inputs, and
  2. by Frederica Darema (IBM),[4][5][6] where “all (processors) processes  begin executing the same program... but through synchronization directives ... self-schedule themselves  to execute different instructions and act on different data” and enabling MIMD parallelization of a given program, and is a more general approach than data-parallel and more efficient than the fork-and-join for parallel execution on general purpose multiprocessors.

The (IBM) SPMD is the most common style of parallel programming and can be considered a subcategory of MIMD in that it refers to MIMD execution of a given (“single”) program.[7] It is also a prerequisite for research concepts such as active messages and distributed shared memory.

Flynn's taxonomy
Single data stream
Multiple data streams
SIMD subcategories[8]
See also

SPMD vs SIMD

[edit]
An example of "Single program, multiple data".

In SPMD parallel execution, multiple autonomous processors simultaneously execute the same program at independent points, rather than in the lockstep that SIMD or SIMT imposes on different data. With SPMD, tasks can be executed on general purpose CPUs. In SIMD the same operation (instruction) is applied on multiple data to manipulate data streams (a version of SIMD is vector processing where the data are organized as vectors). Another class of processors, GPUs encompass multiple SIMD streams processing.  Note that SPMD and SIMD are not mutually exclusive; SPMD parallel execution can include SIMD, or vector, or GPU sub-processing. SPMD has been used for parallel programming of both message passing and shared-memory machine architectures.

Distributed memory

[edit]

On distributed memory computer architectures, SPMD implementations usually employ message passing programming. A distributed memory computer consists of a collection of interconnected, independent computers, called nodes. For parallel execution, each node starts its own program and communicates with other nodes by sending and receiving messages, calling send/receive routines for that purpose. Other parallelization directives such as Barrier synchronization may also be implemented by messages. The messages can be sent by a number of communication mechanisms, such as TCP/IP over Ethernet, or specialized high-speed interconnects such as Myrinet and Supercomputer Interconnect. For distributed memory environments, serial sections of the program can be implemented by identical computation of the serial section on all nodes rather than computing the result on one node and sending it to the others, if that improves performance by reducing communication overhead.

Nowadays, the programmer is isolated from the details of the message passing by standard interfaces, such as PVM and MPI.

Distributed memory is the programming style used on parallel supercomputers from homegrown Beowulf clusters to the largest clusters on the Teragrid, as well as present GPU-based supercomputers.

Shared memory

[edit]

On a shared memory machine (a computer with several interconnected CPUs that access the same memory space), the sharing can be implemented in the context of either physically shared memory or logically shared (but physically distributed) memory; in addition to the shared memory, the CPUs in the computer system can also include local (or private) memory. For either of these contexts, synchronization can be enabled with hardware enabled primitives (such as compare-and-swap, or fetch-and-add. For machines that do not have such hardware support, locks can be used and data can be “exchanged” across processors (or, more generally, processes or threads) by depositing the sharable data in a shared memory area. When the hardware does not support shared memory, packing the data as a “message” is often the most efficient way to program (logically) shared memory computers with large number of processors, where the physical memory is local to processors and accessing memory of another processor takes longer. SPMD on a shared memory machine can be implemented by standard processes (heavyweight) or threads (lightweight).

Shared memory multiprocessing (both symmetric multiprocessing, SMP, and non-uniform memory access, NUMA) presents the programmer with a common memory space and the possibility to parallelize execution. With the (IBM) SPMD model the cooperating processors (or processes) take different paths through the program, using parallel directives (parallelization and synchronization directives, which can utilize compare-and-swap and fetch-and-add operations on shared memory synchronization variables), and perform operations on data in the shared memory (“shared data”); the processors (or processes) can also have access and perform operations on data in their local memory (“private data”). In distinction, with fork-and-join approaches, the program starts executing on one processor and the execution splits in a parallel region, which is started when parallel directives are encountered; in a parallel region, the processors execute a parallel task on different data. A typical example is the parallel DO loop, where different processors work on separate parts of the arrays involved in the loop. At the end of the loop, execution is synchronized (with soft- or hard-barriers[6]), and processors (processes) continue to the next available section of the program to execute. The (IBM) SPMD has been implemented in the current standard interface for shared memory multiprocessing, OpenMP, which uses multithreading , usually implemented by lightweight processes, called threads.

Combination of levels of parallelism

[edit]

Current computers allow exploiting many parallel modes at the same time for maximum combined effect. A distributed memory program using MPI may run on a collection of nodes. Each node may be a shared memory computer and execute in parallel on multiple CPUs using OpenMP. Within each CPU, SIMD vector instructions (usually generated automatically by the compiler) and superscalar instruction execution (usually handled transparently by the CPU itself), such as pipelining and the use of multiple parallel functional units, are used for maximum single CPU speed.

History

[edit]

The acronym SPMD for “Single-Program Multiple-Data” has been used to describe two different computational models for exploiting parallel computing, and this is due to both terms being natural extensions of Flynn’s taxonomy.[7] The two respective groups of researchers were unaware of each other’s use of the term SPMD to independently describe different models of parallel programming.

The term SPMD was proposed first in 1983 by Michel Auguin (University of Nice Sophia-Antipolis) and François Larbey (Thomson/Sintra) in the context of the OPSILA parallel computer and in the context of a fork-and-join and data parallel computational model approach.[1] This computer consisted of a master (controller processor) and SIMD processors (or vector processor mode as proposed by Flynn). In Auguin’s SPMD model, the same (parallel) task (“same program”) is executed on different (SIMD) processors (“operating in lock-step mode”[1] acting on a part (“slice”) of the data-vector. Specifically, in their 1985 paper[2] (and similarly in[3][1]) is stated: “we consider the SPMD (Single Program, Multiple Data) operating mode. This mode allows simultaneous execution of the same task (one per processor) but prevents data exchange between processors.  Data exchanges are only performed under SIMD mode by means of vector assignments.  We assume synchronizations are summed-up to switchings (sic) between SIMD and SPMD operatings (sic) modes using global fork-join primitives”).

Starting around the same timeframe (in late 1983 – early 1984), the SPMD term was proposed by Frederica Darema (at IBM at that time, and part of the RP3 group) to define a different SPMD computational model that she proposed,[6][5][4] as a programming model which in the intervening years has been applied to a wide range of general-purpose high-performance computers (including RP3 - the 512-processor IBM Research Parallel Processor Prototype) and has led to the current parallel computing standards. The (IBM) SPMD programming model assumes a multiplicity of processors which operate cooperatively, all executing the same program but can take different paths through the program based on parallelization directives embedded in the program; and specifically as stated in[6][5][4][9][10] “all processes participating in the parallel computation are created at the beginning of the execution and remain in existence until the end”, (the processors/processes) “execute different instructions and act on different data”, “the job(work) to be done by each process is allocated dynamically”, that is the processes “self-schedule themselves to execute different instructions and act on different data”, thus self-assign themselves to cooperate in execution of serial and parallel tasks (as well as replicate tasks) in the program.  The notion process was used as a generalization of the term processor in the sense that multiple processes can execute on a processor (to for example exploit larger degrees of parallelism for more efficiency and load-balancing). The (IBM) SPMD model was proposed by Darema as an approach different and more efficient than the fork-and-join that was pursued by all others in the community at that time; it is also more general than just “data-parallel” computational model and can encompass fork&join (as a subcategory implementation). The original context of the (IBM) SPMD was the RP3 computer (the 512-prosessor IBM Research Parallel Processor Prototype), which supported general purpose computing, with both distributed and (logically) shared memory.[9] The (IBM) SPMD model was implemented by Darema and IBM colleagues into the EPEX (Environment for Parallel Execution), one of the first prototype programming environments.[6][5][4][9][10][11] The effectiveness of the (IBM) SPMD was demonstrated for a wide class of applications,[9][4] and in 1988 was implemented in the IBM FORTRAN,[12] the first vendor-product in parallel programming; and in MPI (1991 and on),  OpenMP (1997 and on), and other environments which have adopted and cite the (IBM) SPMD Computational Model.

By the late 1980s, there were many distributed computers with proprietary message passing libraries. The first SPMD standard was PVM. The current de facto standard is MPI.

The Cray parallel directives were a direct predecessor of OpenMP.

References

[edit]
  1. ^ a b c d M. Auguin, F. Larbey (1983). "OPSILA: an advanced SIMD for numerical analysis and signal processing". Microcomputers: Developments in Industry, Business, and Education / Ninth EUROMICRO Symposium on Microprocessing and Microprogramming, Pp 311-318 Madrid, September 13–16, 1983.
  2. ^ a b M. Auguin, F. Labrey (1985). "A Multi-processor SIMD Machine: OPSILA". K. Waldschmidt and B. Myhrhaug Eds, @EUROMICRO, 1985, Elsevier Science Publishers B. V. – North Holland.
  3. ^ a b Auguin, M.; Boeri, F.; Dalban, J.P; Vincent-Carrefour, A. (1987). "Experience Using a SIMD/SPMD Multiprocessor Architecture". Multiprocessing and Microprogramming. 21 (1–5): 171–178. doi:10.1016/0165-6074(87)90034-2.
  4. ^ a b c d e Darema, Frederica (2001). "SPMD model: past, present and future, Recent Advances in Parallel Virtual Machine and Message Passing Interface". 8th European PVM/MPI Users' Group Meeting, Santorini/Thera, Greece, September 23–26, 2001. Lecture Notes in Computer Science 2131.
  5. ^ a b c d F. Darema-Rogers, D. A. George, V. A. Norton, and G. F. Pfister (1985). "A VM Parallel Environment". IBM/RC11225 (1/23/85) and IBM/RC11381(9/19/85).{{cite journal}}: CS1 maint: multiple names: authors list (link)
  6. ^ a b c d e Darema, F.; George, D.A.; Norton, V.A.; Pfister, G.F. (1988). "A single-program-multiple-data computational model for EPEX/FORTRAN". Journal of Parallel Computing. 7: 11–24. doi:10.1016/0167-8191(88)90094-4.
  7. ^ a b Flynn, Michael (1972). "Some Computer Organizations and Their Effectiveness" (PDF). IEEE Transactions on Computers. C-21 (9): 948–960. doi:10.1109/TC.1972.5009071. S2CID 18573685.
  8. ^ Flynn, Michael J. (September 1972). "Some Computer Organizations and Their Effectiveness" (PDF). IEEE Transactions on Computers. C-21 (9): 948–960. doi:10.1109/TC.1972.5009071.
  9. ^ a b c d Darema, Frederica (1987). "Applications Environment for the IBM Research Parallel Processor Prototype (RP3)". IBMRC12627 (3/27/87) and in Proceedings of the 1st International Conference on Supercomputing (ICS'87), by Springer-Verlag (1987).
  10. ^ a b Darema, Frederica (1988). "Parallel Applications Development for Shared Memory Systems". IBM/RC12229(1986) and in Parallel Systems and Computation, G. Paul and G. S. Almasi Eds, Elsevier Science Publishers B. V. (North Holland), 1988.
  11. ^ J. M. Stone, F. Darema-Rogers, V. A. Norton, G. F. Pfister (1985). "Introduction to the VM/EPEX Preprocessor and Reference". IBM/RC11407(9/30/85) and IBM/RC11408 (9/30/85).{{cite journal}}: CS1 maint: multiple names: authors list (link)
  12. ^ Toomey, L. J.; Plachy, E. C.; Scarborough, R. G.; Sahulka, R. J.; Shaw, J. F.; Shannon, A. W. (1988). "IBM Parallel FORTRAN". IBM Systems Journal. 27 (4): 416–435. doi:10.1147/sj.274.0416.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Single_program,_multiple_data&oldid=1247991545"